Javascript Menu by Deluxe-Menu.com
Carl Schenck spol. s r.o.

320 SBRK-C, 520 SBRK-C, 720 SBRK-C

Balancing Machine for Crankshafts

  • Fully automatic balancing of crankshafts
  • Digital measurement processing and optimizedcorrection calculation
  • NC axis control for unbalance correction
  • High-speed drilling with drill lubricant or minimum quantity lubrication
  • Interfacing with loading gantryis possible

Range of application

Measurement and correction of unbalance of machined passengervehicle and commercial-vehicle crankshafts. Use of the machine in mid-volume production. Unbalance correction by drilling into the counterweights in one or more correction steps.

Design

Single-station machine with stable balancing frame and hydro-dynamic support pedestals. Hook-drive for
driving the crankshaft at the crankpin. Rear-inclined drill gantry with NC-controlled carriage-drill unit.
Indexing the crankshaft, displacement of the drill unit and control of drilling depth by the microprocessorcontrolled measuring unit.

Sequence of operations

  • Manually or automatically load the crankshaft
  • Close the protective door and start the automatic measuring run:
  • Lower the crank into sleeve shells, close the counter bearing, measuring run, drill the correction holes, check run, open the counter bearing, index to the home position, lift
  • Open the protective door and unload

Special features

Measurement and correction of unbalance in the same station; hence less rotor handling.
The vibrating frame with multiple journal bearings provides measurement under conditions similar to operating conditions, less surface loading when drilling and is gentle on main crank journals.
Drilling with coolant shortens drilling time and improves tool life.
Further information
Arrangement plan
1   Operating panel 2   Measurement and control unit 3   Drill 4   Swarf removal 5   Switch cabinet Plan view (non-binding example: dimensions and set-up of the switch cabinet depend on the relevant application)
Contact

Prodej vyvažovacích strojů

Drahoslav Žila

Phone
+420 736 624 056
E-Mail
Add to list of marked products

Používání cookies
Cookies umožňují maximální kvalitu poskytovaných služeb. Používáním našich internetových stránek a služeb vyjadřujete svůj souhlas s používáním cookies na našich stránkách.
Odkaz na prohlášení o ochraně údajů společnosti Schenck RoTec

OK